Reviews & Opinions
Independent and trusted. Read before buy Pioneer DEH-1450!

Pioneer DEH-1450

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pioneer DEH-1450About Pioneer DEH-1450
Here you can find all about Pioneer DEH-1450 like wiring and other informations. For example: .

Pioneer DEH-1450 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pioneer DEH-1450 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Pioneer DEH-1450 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

High power CD player with FM/AM tuner

English Espaol

Operation Manual

Portugus (B)

DEH-1450 DEH-1450B

Contents

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
Before You Start About this manual 2 Precautions 2 Protecting your unit from theft 2 Removing the front panel 2 Attaching the front panel 2 Whats what 3 Power ON/OFF Turning the unit on 4 Selecting a source 4 Turning the unit off 4 Tuner Listening to the radio 4 Storing and recalling broadcast frequencies 5 Tuning in strong signals 6 Storing the strongest broadcast frequencies 6 Built-in CD Player Playing a CD 6 Playing tracks in a random order 7 Repeating play 7 Pausing CD playback 7
Audio Adjustments Introduction of audio adjustments 8 Using balance adjustment 8 Using the equalizer 9 Recalling equalizer curves 9 Adjusting equalizer curves 9 Adjusting loudness 9 Front image enhancer (FIE) 10 Adjusting source levels 10 Initial Settings Adjusting initial settings 11 Setting the time 11 Setting the FM tuning step 12 Setting the AM tuning step 12 Additional Information Setting the time display on or off 12 CD player and care 12 CD-R/CD-RW discs 13 Understanding built-in CD player error messages 13 Specifications 14

Before You Start

About this manual
This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not selfexplanatory. This operation manual will help you benefit fully from this products potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe precautions on this page and in other sections.
Protecting your unit from theft

English

The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. Important Never use force or grip the display and the buttons tightly when removing or attaching. Avoid subjecting the front panel to excessive shocks. Keep the front panel out of direct sunlight and high temperatures.

Espaol Deutsch

Removing the front panel

Precautions

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
1 Press DETACH to release the front panel. Press DETACH and the right side of the panel is released from the head unit. 2 Grab the front panel and remove. Grab the right side of the front panel and pull away to the left. The front panel will be detached from the head unit.

Franais

CAUTION:

Italiano

Keep this manual handy as a reference for operating procedures and precautions. Always keep the volume low enough so you can hear sounds outside of the car. Protect this product from moisture. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.
3 Put the front panel into the protective case provided for safe keeping.
Attaching the front panel Nederlands
1 Place the front panel flat against the head unit. 2 Press the front panel into the face of the head unit until it is firmly seated.

Whats what

1 VOLUME button Press to increase or decrease the volume. 2 CD EJECT button Press to eject a CD from your built-in CD player. 3 AUDIO button Press to select various sound quality controls. 4 CLOCK button Press to switch clock display on or off. 5 EQ button Press to select various equalizer curves. 6 5//2/3 buttons Press to do manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions.

7 LOUDNESS button Press to switch loudness function on or off. 8 SOURCE button This unit is switched on by selecting a source. Press to cycle through all of the available sources. (PRESET TUNING) buttons Press for preset tuning. 0 LOCAL/BSM button - BAND button Press to select among three FM and one AM band. = DETACH button Press to remove the front panel from the head unit.

Power ON/OFF

Turning the unit on
Press SOURCE to turn the unit on. When you select a source the unit is turned on.

Listening to the radio

Espaol

Selecting a source

You can select a source you want to listen to. To switch to the built-in CD player, load a disc in this unit (refer to page 6). Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Built-in CD playerTuner Notes When no disc is set in this product, built-in CD player source will not change. When this units blue/white lead is connected to the cars auto-antenna relay control terminal, the cars antenna extends when this units source is switched on. To retract the antenna, switch the source off.
If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 12). 1 BAND indicator Shows which band the radio is tuned to, AM or FM.

Deutsch

2 FREQUENCY indicator Shows to which frequency the tuner is tuned. 3 STEREO () indicator Shows that the frequency selected is being broadcast in stereo. 4 PRESET NUMBER indicator Shows what preset has been selected.

Franais Italiano

Turning the unit off
Press SOURCE and hold for at least one second to turn the unit off.

Nederlands

1 Press SOURCE to select the tuner. 2 Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. 3 Press BAND to select a band. Press BAND until the desired band is displayed, FM1, FM2, FM3 for FM or AM. 4 To perform manual tuning, press 2 or 3 with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold 2 or 3 for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. You can cancel seek tuning by pressing either 2 or 3 with a quick press. If you press and hold 2 or 3 you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note When the frequency selected is being broadcast in stereo the STEREO () indicator will light.

Storing and recalling broadcast frequencies
If you press any of the PRESET TUNING buttons you can easily store up to six broadcast frequencies for later recall with the touch of a button. When you find a frequency that you want to store in memory press a PRESET TUNING button and hold until the preset number stops flashing. The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same PRESET TUNING button the radio station frequency is recalled from memory. Notes Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. You can also use 5 and to recall radio station frequencies assigned to PRESET TUNING buttons.

Built-in CD player

Tuning in strong signals
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press LOCAL/BSM to turn local seek tuning on. Local seek sensitivity (LOC) appears in the display. 2 When you want to return to normal seek tuning, press LOCAL/BSM to turn local seek tuning off.

Playing a CD

1 TRACK NUMBER indicator Shows the track currently playing. 2 PLAY TIME indicator Shows the elapsed playing time of the current track.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under PRESET TUNING buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. Press and hold LOCAL/BSM for about two seconds to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under PRESET TUNING buttons in order of their signal strength. When finished, BSM stops flashing. To cancel the storage process, press

LOCAL/BSM.

1 Insert a CD into the CD loading slot. Playback will automatically start. CD loading slot
You can eject a CD by pressing CD EJECT. 2 After a CD has been inserted, press SOURCE to select the built-in CD player. 3 Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered.

Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using PRESET TUNING.
4 To perform fast forward or reverse, press and hold 2 or 3. 5 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes The built-in CD player plays one, standard, 12-cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. Do not insert anything other than a CD into the CD loading slot. If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press CD EJECT to eject the disc, and check the disc for damage before inserting the disc again. If the built-in CD player does not operate properly, an error message such as ERR14 may be displayed. Refer to Understanding built-in CD player error messages on page 13.

Repeating play

Repeat play lets you hear the same track over again. 1 Press 5 to turn repeat play on. RPT appears in the display. The track presently playing will play and then repeat. 2 Press 5 to turn repeat play off. The track presently playing will continue to play and then play the next track. Note If you perform track search or fast forward/reverse, repeat play is automatically cancelled.

Pausing CD playback

Pause lets you temporarily stop playback of the CD. 1 Press 6 to turn pause on. PAUSE appears in the display. Play of the current track pauses. 2 Press 6 to turn pause off. Play will resume at the same point that you turned pause on.
Playing tracks in a random order
Random play lets you play back tracks on the CD in a random order. 1 Press 4 to turn random play on. RDM appears in the display. Tracks will play in a random order. 2 Press 4 to turn random play off. Tracks will continue to play in order.

Audio Adjustments

Introduction of audio adjustments

Using balance adjustment

You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FADER. Press AUDIO until FADER appears in the display. If the balance setting has been previously adjusted, BAL will be displayed. 2 Press 5 or to adjust front/rear speaker balance. Each press of 5 or moves the front/rear speaker balance towards the front or the rear. F15 R15 is displayed as the front/rear speaker balance moves from front to rear. 0 is the proper setting when only two speakers are used. 3 Press 2 or 3 to adjust left/right speaker balance. When you press 2 or 3, BAL: 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right. BAL:L9 BAL:R9 is displayed as the left/right speaker balance moves from left to right.

1 AUDIO display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FADER (balance adjustment)EQ (equalizer) LOUD (loudness)FIE (front image enhancer)SLA (source level adjustment) When selecting the FM tuner as the source, you cannot switch to SLA. To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.
Deutsch Franais Italiano Nederlands

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CSTM. 1 Press AUDIO to select the equalizer mode. Press AUDIO until EQ appears in the display. 2 Select the band you want to adjust with 2/3. L (low) M (mid) H (high) 3 Press 5 or to adjust the equalizer curve. Each press of 5 or increases or decreases the equalizer curve respectively. +is displayed as the equalizer curve is increased or decreased. The actual range of the adjustments are different depending on which equalizer curve is selected. Note
Recalling equalizer curves
There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
Display SBASS PWRFL NTRL VOCAL CSTM FLAT Equalizer curve Super bass Powerful Natural Vocal Custom Flat
CSTM is an adjusted equalizer curve that you create. When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. Press EQ to select the equalizer. If the equalizer has been previously set to an equalizer curve other than PWRFL then the title of that previously selected equalizer curve will be displayed, such as SBASS, NTRL, VOCAL, CSTM, or FLAT.

If you make adjustments when a curve other than CSTM is selected, the newly adjusted curve will replace the previous curve. Then a new curve with CSTM appears on the display while selecting the equalizer curve.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the display.
2 Select LOUD on or off with 5/. 3 Select the desired level with 2/3.
LOW (low) MID (mid) HI (high)

Adjusting source levels

SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the volume level of the FM tuner, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust.
Note You can also switch LOUD on or off by pressing the LOUDNESS.
Front image enhancer (FIE)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. You can select the frequency you want to cut. Precaution When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume. 1 Press AUDIO to select FIE. Press AUDIO until FIE appears in the display. 2 Select FIE on or off with 5/. 3 Select the desired frequency with 2/3. 100160250 (Hz) Notes After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced. Switch the F.I.E. function OFF when using a 2speaker system.
2 Press AUDIO to select SLA. Press AUDIO until SLA appears in the display. 3 Press 5 or to adjust the source volume. Each press of 5 or increases or decreases the source volume. SLA +4 SLA 4 is displayed as the source volume is increased or decreased. Notes Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner. The AM tuner volume level can also be adjusted with source level adjustments.

Initial Settings

Adjusting initial setting

Setting the time

This is used to set the time on the units clock display. 1 Press AUDIO to select the time. Press AUDIO until the time appears in the display.
Initial settings lets you perform initial set up of different settings for this unit. 1 Press SOURCE and hold until the unit turns off. 2 Press AUDIO and hold until TIME (12:00) appears in the display. Press AUDIO repeatedly to switch between the following settings: TIMEFM STEPAM STEP Use the following instructions to operate each particular setting. To cancel initial settings, press BAND. You can also cancel initial settings by holding down AUDIO until the unit turns off.

2 Select the portion of the time display you wish to set with 2/3. Pressing 2/3 will select a portion of the clock display: HOURMINUTE As you select portions of the clock display the portion selected will blink.
3 Select the correct time with 5/. Pressing 5 will increase the selected hour or minute. Pressing will decrease the selected hour or minute.

Additional Information

Setting the FM tuning step
The tuning step employed by Seek Tuning in the FM mode can be switched between 100 kHz (preset at the factory) and 50 kHz. 1 Press AUDIO to select FM STEP. Press AUDIO repeatedly until FM 100 appears in the display. 2 Select the FM tuning step with 2/3. Note If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.
Setting the time display on or off
You can turn the time display on even when the sources are off. Press CLOCK to select the time display. Each press of CLOCK turns time display on or off. The time display disappears temporarily when you perform other operations, but the time indication is displayed again after 25 seconds.

CD player and care

Use only CDs that have the Compact Disc Digital Audio mark as shown below.

COMPACT

DIGITAL AUDIO
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 1,602 kHz allowable) to 10 kHz (530 1,640 kHz allowable). 1 Press AUDIO to select AM STEP. Press AUDIO repeatedly until AM 9 appears in the display. 2 Select the AM tuning step with 2/3. Pressing 2/3 will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display.
Use only normal, round CDs. If you insert irregular, non-round, shaped CDs they may jam in the CD player or not play properly.
Check all CDs for cracks, scratches or warped discs before playing. CDs that have cracks, scratches or are warped may not play properly. Do not use such discs. Avoid touching the recorded (non-printed side) surface when handling the disc. Store discs in their cases when not in use. Keep discs out of direct sunlight and do not expose the discs to high temperatures. Do not attach labels, write on or apply chemicals to the surface of the discs.

Italiano Nederlands

To clean dirt from a CD, wipe the disc with a soft cloth outward from the center of the disc.

Understanding built-in CD player error messages
When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your nearest Pioneer Service Center.
Message ERR11, 12, 17, 30 ERR11, 12, 17, 30 ERR14 Cause Dirty disc Action Clean disc.
If the heater is used in cold weather, moisture may form on components inside the CD player. Condensation may cause the CD player to not operate properly. If you think that condensation is a problem turn off the CD player for an hour or so to allow the CD player to dry out and wipe any damp discs with a soft cloth to remove the moisture. Road shocks may interrupt CD playback.

Scratched disc

Replace disc.
Blank disc Electrical or mechanical
Check the disc. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. Turn off the CD player until the CD player cools down.

CD-R/CD-RW discs

CD-R (CD-Recordable) and CD-RW (CDRewritable) discs recorded on CD-R/CD-RW units other than a music CD recorder may not play properly on this CD player. Music CD-R/CD-RW discs, even recorded on a music CD recorder, may not play properly on this CD player due to differing disc characteristics, scratches or dirt on the disc. Dirt or condensation on the lens inside this unit may also prevent playback. Read the precautions with CD-R/CD-RW discs before using them.
ERR10, 11, 12, 14, 17, 30, A0

CD player overheated

Specifications

General

Power source.. 14.4 V DC (10.8 15.1 V allowable) Grounding system. Negative type Max. current consumption.. 10.0 A Dimensions (W H D): (DIN) Chassis. 157 mm Nose. 19 mm (D) Chassis. 162 mm Nose. 14 mm Weight.. 1.3 kg

CD player

System.. Compact disc audio system Usable discs.. Compact disc Signal format: Sampling frequency. 44.1 kHz Number of quantization bits.. 16; linear Frequency characteristics.. 5 20,000 Hz (1 dB) Signal-to-noise ratio. 94 dB (1 kHz) (IEC-A network) Dynamic range. 92 dB (1 kHz) Number of channels.. 2 (stereo)
Continuous power output is 20 W per channel min. into 4 ohms, both channels driven 50 to 15,000 Hz with no more than 5% THD. Maximum power output.. 45 W 4 Load impedance.. 4 (allowable) Preout max output level/output impedance.. 2.2 V/1 k Equalizer (3-Band Equalizer): (LOW). Level: 12 dB (MID).. Level: 12 dB (HIGH).. Level: 12 dB Loudness contour (LOW). +3.5 dB (100 Hz), +3 dB (10 kHz) (MID).. +10 dB (100 Hz), +6.5 dB (10 kHz) (HIGH).. +11 dB (100 Hz), +11 dB (10 kHz) (volume : 30 dB)

Portugus (B) Franais

Gama de freqncias. 531 1.602 kHz (9 kHz) 530 1.640 kHz (10 kHz) Sensibilidade utilizvel. 18 V (Sinal-rudo: 20 dB) Seletividade. 50 dB (9 kHz) 50 dB (10 kHz)
Nota: As especificaes e o design esto sujeitos a modificaes sem aviso prvio em virtude de melhoramentos.

DETACH DETACH

7 LOUDNESS 1 VOLUME 2 CD EJECT 9 1-6(PRESET TURNING) 3 AUDIO 4 CLOCK 5 EQ 3 = DETACH 0 LOCAL/BSM - BAND 8 SOURCE

SOURCE

SOURCE SOURCE

1 BAND 2 FREQUENCY

3 STEREO

4 PRESET NUMBER

SOURCE PRESET TUNING VOLUME

BAND FM FM3 AM 2 3

PRESET TUNING PRESET NUMBER

BAND FM1 FM2 4

PRESET TUNING 3

SET TUNING 5 PRE-

STEREO

LOCAL/BSM LOC LOCAL/

TACK NUMBER 2 PLAY TIME

BSM PRESET TUNING 1-6 1

LOCAL/BSM BSM

BSM BSM PRESET TUNING

BSM LOCAL/BSM BSM PRESET TUNING 2 SOURCE CD EJECT

VOLUME VOLUME

CD EJECT ERR 6

2 LOUD

AUDIO AUDIO

FAD FADER

BAL 5
AUDIO AUDIO FADER FIE SLA BAND FM EQ LOUD SLA
FAD FBAL L9 BAL RBAL 0 FAD R15

CSTM SBASS

PWRFL NTRL VOCAL CSTM FLAT

AUDIO AUDIO M H EQ

+6 -6

CSTM FLAT FLAT

EQ SBASS VOCAL CSTM FLAT PWRFL NTRL 1 AUDIO AUDIO LOUD LOUD
LOUD LOUDNESS 1 FM AUDIO SLA SLA
AUDIO 5 SLA+4 SLA-4 AUDIO AUDIO 3 250(Hz) 160 FIE FIE FIE

AUDIO AUDIO 3 MINUTE 3

00) TIME
SOURCE AUDIO AUDIO FM STEP TIME(12:

AM STEP BAND AUDIO 5

AUDIO AUDIO 2 3

STEP FM FM

CLOCK CLOCK

AUDIO AUDIO 3

AM STEP AM9
ERR 1 1,12,17,30 ERR 1 1,12,17,30 ERR 14 ERR 10,1 1,12,14 17,30,A0

CD-R/CD-RW

CD U uD qGA U
WOu CD UuD UE UEM CD WLJ UuD U?LF WKUI UuD U j/ ed [ WMUF* d WOD Wu ; UIM b qO ed d hzUB ed qO U{uC v U W IEC-A UB WJ ed qO w?JOUMO UDM udO uMI b
[ Xu [ dU UO WUD bB UL K WKU Xu [ VU d iQ UE dO [ UOK N vB oL UH d UF

3 qJON 3 WbI*

3 qJON 3 WbI* r [ u
edUGO [ [ d UD Xu dJU [ qO U?LF WKUI WOU ( v U W uu q?O U{uC Xu dJU [ qO qO bN WOU ( uu IEC-A UB WJ qO U{uC v U W qO bM [ tuA udO ed qO ed d WU bM qO udO qB ed qO

t n u

ed ed d UD ed ed U? W Xu dJU U?LF WKUI WOU ( q?O U{uC v ed qO WOzUI ed qO
v b UM qJ u dL * WUD d guA ed v 5UMI l w s d fO wK wI u WUDK d vB WKU qOL WUF UL K d u * wzb d vB Xu [ Ue wDOD u wDOD u* qO u * LOW qO u * MID qO u * HIGH wuB jO; ed qO [ + LOW ed qO + ed qO + MID ed qO [ + ed qO + HIGH ed qO + qO uB

w Ozd UN'

UN e WO U _ W uK p

U O u t WOU_ WuK s1_ VU' p w Ozd UN' s WOU_ WuK e r
YO tO u u qN UJ w qOb cN kH W?OUO UNOMK qOGA uD) UFd uJ c? bIU UCH M uB u 0 ULz kH UO U u UL p `L qK s UN' c WUL r ` rO UNM Xd WUD qB - U?Nd U V UI Wd* dc Uu pb u*U qB wGM UL UN' c qLF r dOuU UM* bLF WUO ed dQ
WO u UN K w WO U _ W uK l{ s qJA UNEH( WI d*

WO U _ W uK VO d

w Ozd UN' U 0 WO U _ W uK l{ UN' WN w WO U _ W uK jG{ U?J S UNF{u c Q v w Ozd
d?O?uU s UN' c pzd vK dJA

s wNM bF W?O

WIdD UN qOGA WOHO dF WOKOGA ULOKF c d vd ?I UNO udK s UJ w bOF UNF{ ULOKF c d
U?N' w sLC * w U uD qGA w UuD UL
w?zuA VOd UOM UL dJ* UL UR w WuD UL UI

uB j { UOKL

c u WOUO UNOM Wd s UN WUL WOU_ WuK e WOU_ WuK VOd e_U ndF
uB j{ UOKLF ndF u j{ ULF wDOD u* ULF wDOD u* UOMM Ub wDOD u* UOMM j{ uB uK j{ (FIE) WOU_ uB s UB* Uu j{

WOzb * U ON

UN' qOGA bB* UO UN' UI
WOzb* UON j{ XOu j{ Y WHu WKd WON t Y WHu WKd WON

WO U{ U uKF

udK UL Y Uc Ub se WuI Y U vK WHu* Y Uc u se
Xu W{U UI qOGA WON WUMF w UuD qGA CD-R/CD-RW Uu?D U?uD qGA UD UD rN UN' w sLC* w UH u*

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, California 90801, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo 1009 3er. Piso Desp. 302 Col. Del Valle Mexico, D.F. C.P. 03100 TEL: 5-688-52-90
Published by Pioneer Corporation. Copyright 2001 by Pioneer Corporation. All rights reserved. Publication de Pioneer Corporation. Copyright 2001 Pioneer Corporation. Tous droits de reproduction et de traduction rservs. Printed in Imprim

<KSNNN/01G00001>

<CRD3488-A/JS> ES

doc1

Demo mode

Important ! Failure to connect the red lead (ACC) of this unit to a terminal coupled with ignition switch on/off operations may lead to battery drain. ! Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.
The demo automatically starts when the ignition switch is set to ACC or ON while the unit is turned off. Turning off the unit does not cancel demo mode. To cancel the demo mode, press /DISP/SCRL. Press /DISP/SCRL again to start. Operating the demo while the ignition switch is set to ACC may drain battery power.
Resetting the microprocessor
The microprocessor must be reset in the following situations: ! Before using this unit for the first time after installation ! If the unit fails to operate properly ! When strange or incorrect messages appear on the display

RESET button

Remove the front panel.
2 Press RESET with a pen tip or other pointed instrument.

About this manual

In the following instructions, USB memories and USB audio players are collectively referred to as USB storage device. In this manual, iPod and iPhone will be referred to as iPod.

Operating this unit

Head unit

Remote control

i q p ihg f
Part 9 SRC/OFF PHONE/ NECT (list) MULTI-CONTROL (M.C.) Disc loading slot h (eject) USB port AUX input jack (3.5 mm stereo jack) Detach button /CONa b c d e f g h i

k l m n

b 9 c a
Part indicator 6/PAUSE 1 to 6 k 3/ 2/ 1/iPod /DISP/SCRL m S.Rtrv/DISP OFF BAND/ESC n l j Part
Operation Press to increase or decrease volume. Press to mute. Press again to unmute. Press to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Press to select an audio function. Press to select different displays. Press and hold to scroll through the text information. Press to pause or resume playback. Press to select functions. Press and hold to recall the initial setting menu when the sources are off. Press to display the track title, folder, or file list depending on the source. While in the operating menu, press to control functions.

VOLUME MUTE

a/b/c/d

AUDIO DISP/SCRL

indicator Lights up when your cellular phone is connected via Bluetooth wireless technology.

FUNCTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB audio player/USB memory as any device connected directly to the unit will protrude out from the unit and may be dangerous. Do not use unauthorized products.

q LIST/ ENTER

Display indication
Indicator (folder random) (shuffle)
State Folder random is on. When random function is on, only is displayed. Shuffle or shuffle all function is on while the iPod source is being selected. The sound retriever function is on. CTRL (control mode) is set to iPod. Shows when the automatic answering function is on.

Indicator

bc d e
d (sound retriever) iPod (auto answer)
State Tuner: band and frequency Built-in CD, USB storage device and iPod: elapsed playback time and text information When an SMS is received by the connected cellular phone, a message is displayed to notify you of the reception. The disc (track) artist name is displayed. Artist search refinement on the iPod browsing function is in use. The disc (album) name is displayed. Album search refinement on the iPod browsing function is in use. The track (song) name is displayed. A playable audio file has been selected while operating the list. Song search refinement on the iPod browsing function is in use. An upper tier of folder or menu exists. e f

Main display section

(artist)

Basic Operations

Important ! Handle gently when removing or attaching the front panel. ! Avoid subjecting the front panel to excessive shock. ! Keep the front panel out of direct sunlight and high temperatures. ! To avoid damage to the device or vehicle interior, remove any cables and devices attached to the front panel before detaching it.

(disc)

(song)

c (list)

The list function is operated. A lower tier of folder or menu exists. It flashes when a song/album related to the song currently playing is selected from iPod. The local seek tuning is on. The selected frequency is being broadcasted in stereo. Folder repeat is on. When repeat function is on, only is displayed.

LOC 5 (stereo)

(folder repeat)
Removing the front panel to protect your unit from theft 1 Press the detach button to release the front panel. 2 Grab the front panel and remove. 3 Always keep the detached front panel in a protection device such as a protection case. Re-attaching the front panel 1 Slide the front panel to the left until it clicks. Front panel and the head unit are connected on the left side. Make sure that the front panel has been properly connected to the head unit.
Use and care of the remote control
Using the remote control 1 Point the remote control in the direction of the front panel to operate. When using for the first time, pull out the film protruding from the tray. Replacing the battery 1 Slide the tray out on the back of the remote control. 2 Insert the battery with the plus (+) and minus () poles aligned properly.

2 Press the right side of the front panel until it is firmly seated. If you cant attach the front panel to the head unit successfully, try again. However, forcing the front panel into place may result in damage. Turning the unit on 1 Press SRC/OFF to turn the unit on. Turning the unit off 1 Press SRC/OFF and hold until the unit turns off. Selecting a source 1 Press SRC/OFF to cycle between: TUNER (tuner)CD (built-in CD player)USB (USB)/USB-iPod (iPod)AUX (AUX) Adjusting the volume 1 Turn M.C. to adjust volume.

WARNING

! Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately. ! Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like.
! Use one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic objects. ! If the battery leaks, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, comply with governmental regulations or environmental public institutions rules that apply in your country/area.
Note When this units blue/white lead is connected to the vehicles auto-antenna relay control terminal, the vehicles antenna extends when this units source is turned on. To retract the antenna, turn the source off.
Important ! Do not store the remote control in high temperatures or direct sunlight. ! The remote control may not function properly in direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.
Making a phone call 1 Refer to Phone menu operation on page 16. Answering an incoming call 1 When a call is received, press M.C. ! You can also perform this operation by pushing M.C. Ending a call 1 Press PHONE/ /CONNECT. /CON-
Using Bluetooth telephone
Important ! Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using it without the engine running can drain the battery power. ! Operations may vary depending on the kind of cellular phone. ! Advanced operations that require attention such as dialing numbers on the monitor, using the phone book, etc., are prohibited while driving. Park your vehicle in a safe place when using these advanced operations.
Rejecting an incoming call 1 When a call is received, press PHONE/ NECT.

Answering a call waiting 1 When a call is received, press M.C. ! You can also perform this operation by pushing M.C. Switching between callers on hold 1 Press M.C. Canceling call waiting 1 Press PHONE/ /CONNECT. Adjusting the other partys listening volume 1 Push M.C. up or down while talking on the phone. Turning private mode on and off. 1 Press BAND/ESC while talking on the phone. Switching the information display 1 Press /DISP/SCRL while talking on the phone. ! Press and hold /DISP/SCRL to scroll.
Setting up for hands-free phoning
Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone.
1 Connection Operate the Bluetooth telephone connection menu. Refer to Connection menu operation on page 14. 2 Function settings Operate the Bluetooth telephone function menu. Refer to Phone menu operation on page 16.
Notes ! If private mode is selected on the cellular phone, hands-free phoning may not be available. ! The estimated call time appears in the display (this may differ slightly from the actual call time).
Menu operations identical for function settings/audio adjustments/initial settings/lists
Returning to the previous display Returning to the previous list/category (the folder/category one level higher) 1 Press /DISP/SCRL. Returning to the main menu Returning to the top tier of list/category 1 Press and hold /DISP/SCRL. Returning to the ordinary display Canceling the initial setting menu 1 Press BAND/ESC. Returning to the ordinary display from the list/category 1 Press BAND/ESC.
Storing and recalling stations
You can easily store up to six stations for each band as presets.
Using preset tuning buttons 1 When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing. 2 Press one of the preset tuning buttons (1 to 6) to select the desired station. Using the preset screen 1 Press to switch to the preset screen. 2 Use M.C. to store the selected frequency in the memory. Turn to change the preset number. Press and hold to store. 3 Use M.C. to select the desired station. Turn to change the station. Press to select.

Function settings

1 Press M.C. to display the main menu.
Selecting a band 1 Press BAND/ESC until the desired band (FM-1, FM-2, FM-3 for FM or AM) is displayed. Manual tuning (step by step) 1 Push M.C. left or right. Preset tuning 1 Push M.C. up or down. Seeking 1 Push and hold M.C. left or right, and then release. You can cancel seek tuning by pushing M.C. left or right. While pushing and holding M.C. left or right, you can skip stations. Seek tuning starts as soon as you release M.C.

2 Turn M.C. to change the menu option and press to select FUNCTION.
3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function.
Repeat (repeat play) ! Refer to Repeat (repeat play) on page 12. However the repeat range is different from CD/external storage device. Refer to Selecting a repeat play range on the previous page.
The playback speed of audiobook can be changed. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select your favorite setting. ! Faster Playback at a speed faster than normal ! Normal Playback at normal speed ! Slower Playback at a speed slower than normal 3 Press M.C. to confirm the selection. S.Rtrv (sound retriever) ! Refer to S.Rtrv (sound retriever) on page 12.
Shuffle (shuffle) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select your favorite setting. ! Songs Play back songs in the selected list in random order. ! Albums Play back songs from a randomly selected album in order. ! OFF Cancel random play. 3 Press M.C. to confirm the selection. Shuffle all (shuffle all) ! Press M.C. to turn shuffle all on. To turn off, set Shuffle in the FUNCTION menu to off.
Notes ! Operation is complete even if the menu is cancelled before being confirmed. ! Switching the control mode to iPod pauses song playback. Operate the iPod to resume playback. ! The following functions are still accessible from the unit even if the control mode is set to iPod. Volume Fast forward/reverse Track up/down Pausing Switching the text information ! When the control mode is set to iPod, operations are limited as follows: Only CTRL (control mode), PAUSE (pause) and S.Rtrv (sound retriever) functions are available. The browse function cannot be operated from this unit.
Link play (link play) 1 Press M.C. to display the setting mode. 2 Turn M.C. to change the mode; press to select. For details about the settings, refer to Playing songs related to the currently playing song on the previous page. CTRL (control mode) 1 Press M.C. to select your favorite setting. For details about the settings, refer to Operating this units iPod function from your iPod on the previous page. PAUSE (pause) ! Refer to Pause (pause) on page 12.
Audiobooks (audiobook speed)

Bluetooth Telephone

Connection menu operation
Important Be sure to park your vehicle and apply the parking brake when performing this operation.
1 Press and hold PHONE/ /CONNECT to display the connection menu.
# You cannot operate this step during a call.
2 Turn M.C. to select the function. After selecting, perform the following procedures to set the function.
Device list (connecting or disconnecting a cellular phone from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to connect/disconnect. 3 Press M.C. to connect/disconnect the selected cellular phone. If the connection is established, * is indicated on the device name. Delete device (deleting a cellular phone from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to delete. ! Press and hold M.C. to switch the BD address and device name. 3 Press M.C. to display Delete YES. 4 Press M.C. to delete a cellular phone information from the device list. ! While this function is in use, do not turn off the engine. Add device (connecting a new cellular phone)

Initial Settings

1 Press SRC/OFF and hold until the unit turns off. 2 Press M.C. and hold until the initial setting menu appears in the display. 3 Turn M.C. to select the initial setting. After selecting, perform the following procedures to set the initial setting.
Language (multi language) Menu language related to Bluetooth telephone can be changed. ! Some characters may not be displayed properly. 1 Press M.C. to select the language. EnglishESPAOL Clock set (setting the clock)
1 Press M.C. to display the setting mode. 2 Press M.C. to select the segment of the clock display you wish to set. HourMinute As you select segments of the clock display, the selected segment flashes. 3 Turn M.C. to adjust the clock. Clock (clock on/off setting) 1 Press M.C. to turn the clock display on or off. FM step (FM tuning step) The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the FM tuning step. 50kHz (50 kHz)100kHz (100 kHz) 3 Press M.C. to confirm the selection. AM step (AM tuning step) The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to kHz allowable) to 10 kHz (530 kHz to kHz allowable). 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the AM tuning step. 10kHz (10 kHz)9kHz (9 kHz) 3 Press M.C. to confirm the selection. Warning (warning tone setting) If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone. 1 Press M.C. to turn the warning tone on or off. AUX (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. 1 Press M.C. to turn auxiliary setting on or off. USB PnP (plug and play)

This setting allows you to switch your source to USB/ USB-iPod automatically. 1 Press M.C. to turn the plug and play on or off. ! ON When USB storage device/iPod is connected, the source is automatically switched to USB/USB-iPod. If you disconnect your USB storage device/iPod, this units source is turned off. ! OFF When USB storage device/iPod is connected, the source is not switched to USB/ USB-iPod automatically. Please change the source to USB/USB-iPod manually. Brightness (display brightness setting) 1 Press M.C. to display the setting mode. 2 Turn M.C. to switch the brightness setting. High (high)Low (low) 3 Press M.C. to confirm the selection. SW control (rear output and subwoofer setting) The rear speaker leads output (Rear SP:) and RCA output (Preout:) of this unit can be used for fullrange speaker (Rear SP: :Full/Preout: :Rear) or subwoofer (Rear SP: :SUBW/Preout: :SUBW) connection. If you switch to Rear SP: :SUBW, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, Rear SP: is set for rear full-range speaker connection (Full). When Rear SP: :Full is selected, you can connect the RCA output to a subwoofer. In this case, you can select whether to use the subwoofer controllers (low pass filter, phase) built-in Preout: : SUBW or the auxiliary Preout: :Rear. 1 Press M.C. to display the setting mode. 2 Press M.C. to cycle between as following: Rear SP:/Preout:Full (SUBW)/SUBW(Rear) 3 Turn M.C. to change the setting. Rear SP:: FullSUBW Preout:: SUBWRear ! Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to SW setting 1 (subwoofer on/off setting) on page 17). ! If you change this setting, subwoofer output in the audio menu will return to the factory settings. DEMO (demo display setting)
1 Press M.C. to turn the demo display on or off. ! You can also turn on or off feature demo by pressing /DISP/SCRL while this unit is turned off. For more details, refer to Demo mode on page 3. Ever SCRL (scroll mode setting) When Ever Scroll is set to ON, recorded text information scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once. 1 Press M.C. to turn the ever scroll on or off. BT clear (resetting the Bluetooth wireless technology module) Bluetooth telephone data can be deleted. To protect personal information, we recommend deleting this data before transferring the unit to other persons. The following settings will be deleted. ! phone book entries on the Bluetooth telephone ! preset numbers on the Bluetooth telephone ! registration assignment of the Bluetooth telephone ! call history of the Bluetooth telephone ! information of the connected Bluetooth telephone 1 Press M.C. to show the confirmation display. YES is displayed. Clearing memory is now on standby. If you do not want to reset phone memory, push M.C. left. The display reverts. 2 Press M.C. to clear the memory. Cleared is displayed and the settings are deleted. ! While this function is in use, do not turn off the engine. BT VER INFO (Bluetooth version display) You can display the system versions of this unit and of Bluetooth module. 1 Press M.C. to display the information. S/W update (updating the software) This function is used to update this unit with the latest software. For information on the software and updating, refer to our website. ! Never turn the unit off while the software is being updated. 1 Press M.C. to display the data transfer mode. Follow the on-screen instructions to finish updating the software.

The inserted disc Replace the disc. does not contain any playable files. The inserted disc Replace the disc. contains DRM protected WMA files. Replace the disc. All the files on the inserted disc are embedded with DRM.

SKIPPED

You are using a device, such as a cellular phone, that transmits electromagnetic waves near the unit.

PROTECT

USB storage device
Message NO DEVICE Cause When plug and play is off, no USB storage device is connected. Action ! Turn the plug and play on. ! Connect a compatible USB storage device.

Message Format Read

Cause Sometimes there is a delay between the start of playback and when you start to hear any sound. There are no songs.
Action Wait until the message disappears and you hear sound.

Message ERROR-19

Cause Communication failed.
Action Perform one of the following operations. Turn the ignition switch OFF and back ON. Disconnect or eject the external storage device. Change to a different source. Then, return to the USB or SD source. USB storage device should be formatted with FAT12, FAT16 or FAT32.

NO AUDIO

Transfer the audio files to the USB storage device and connect. Follow the USB storage device instructions to disable the security. Play an audio file not embedded with Windows Media DRM 9/10.
The connected USB storage device has security enabled SKIPPED The connected USB storage device contains WMA files embedded with Windows Media DRM 9/10 All the files in the USB storage device are embedded with Windows Media DRM 9/10 The USB connector or USB cable has shortcircuited. The connected USB storage device consumes more than 500 mA (maximum allowable current).

ERROR-23

USB storage device is not formatted with FAT12, FAT16 or FAT32
Message Transfer audio files not embedded with Windows Media DRM 9/10 to the USB storage device and connect. Check that the USB connector or USB cable is not caught in something or damaged. Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect only compliant USB storage devices. Disconnect your device and replace it with a compatible USB storage device. NO DEVICE Cause When plug and play is off, no USB storage device or iPod is connected. Sometimes there is a delay between the start of playback and when you start to hear any sound. Communication failed. Action ! Turn the plug and play on. ! Connect a compatible iPod. Wait until the message disappears and you hear sound.

CHECK USB

Format Read

ERROR-19

Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it.

iPod failure

N/A USB
Not compatible USB device

Message ERROR-16

Action

Handling guideline

Discs and player
Use only discs featuring either of following two logos.
Update the iPod The iPod firmware versions are version. old. iPod failure Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. Disconnect your device and replace it with a compatible iPod.

Non-compatible iPod

Use 12-cm disc. Do not use 8-cm disc or an adapter for 8-cm disc. Use only conventional, fully circular discs. Do not use shaped discs.
Make sure the conThe iPod operates correctly but nection cable for does not charge the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back ON or disconnect the iPod and reconnect. There are no songs. Transfer songs to the iPod.
Do not insert anything other than a CD into the CD loading slot. Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player. Unfinalized CD-R/CD-RW disc playback is not possible. Do not touch the recorded surface of the discs. Store discs in their cases when not in use. Avoid leaving discs in excessively hot environments including under direct sunlight.
Select a list that There are no songs in the cur- contains songs. rent list.
Message ERROR-10 Cause The power failed for the Bluetooth module of this unit. Action Turn the ignition switch OFF and then to ACC or ON. If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Station.
Do not attach labels, write on or apply chemicals to the surface of the discs. To clean a CD, wipe the disc with a soft cloth outward from the center. Condensation may temporarily impair the players performance. Leave it to adjust to the warmer temperature for about one hour. Also, wipe any damp discs with a soft cloth. Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions, and so on. Road shocks may interrupt disc playback. Read the precautions for discs before using them.

DualDiscs USB storage device
Connections via USB hub are not supported. Do not connect anything other than a USB storage device. Firmly secure the USB storage device when driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or accelerator pedal. Address any questions you have about your USB storage device to the manufacturer of the device. Do not leave the USB storage device in any place with high temperatures. Depending on the USB storage device, the following problems may occur. ! Operations may vary. ! The storage device may not be recognized. ! Files may not be played back properly. ! The device may generate noise in the radio. DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other. Since the CD side of DualDiscs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this unit. Frequent loading and ejecting of a DualDisc may result in scratches on the disc. Serious scratches can lead to playback problems on this unit. In some cases, a DualDisc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using DualDisc with this unit. Please refer to the information from the disc manufacturer for more detailed information about DualDiscs.
Compressed audio compatibility (disc, USB)
File extension:.wma Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to 384 kbps (VBR) Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz Windows Media Audio Professional, Lossless, Voice/ DRM Stream/Stream with video: No
Do not leave the iPod in direct sunlight for extended amounts of time. Doing so may cause the iPod to malfunction from the extreme rise in temperature. Do not leave the iPod in places with high temperatures. To ensure proper operation, connect the dock connector cable from the iPod directly to this unit. Firmly secure the iPod when driving. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal. For details, refer to the manuals for the iPod. About iPod settings ! When an iPod is connected, this unit changes the EQ (equalizer) setting of the iPod to off in order to optimize the acoustics. When you disconnect the iPod, the EQ returns to the original setting. ! You cannot set Repeat to off on the iPod when using this unit. Repeat is automatically changed to All when the iPod is connected to this unit.

File extension:.mp3 Bit rate: 8 kbps to 320 kbps Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1 kHz, 48 kHz for emphasis) Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4 (ID3 tag Version 2.x is given priority over Version 1.x.) M3u playlist: No MP3i (MP3 interactive), mp3 PRO: No
File extension:.wav Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM) Sampling frequency: 16 kHz to 48 kHz (LPCM), 22.05 kHz and 44.1 kHz (MS ADPCM)
Packet write data transfer: No Regardless of the length of blank section between the songs of the original recording, compressed audio discs play with a short pause between songs.
Playable folder hierarchy: up to eight tiers (A practical hierarchy is less than two tiers.) Playable folders: up to Playable files: up to Playback of copyright protected files: No Partitioned USB storage device: Only the first playable partition can be played. There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies.
Compatible format: AAC encoded by iTunes File extension:.m4a Sampling frequency: 11.025 kHz to 48 kHz Transmission rate: 16 kbps to 320 kbps, VBR Apple Lossless: No AAC file bought on the iTunes Store (.m4p file extension): No

Supplemental information

Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. This unit may not operate correctly depending on the application used to encode WMA files. There may be a slight delay when starting playback of audio files embedded with image data. Russian text to be displayed on this unit should be encoded with the following character sets: ! Unicode (UTF-8, UTF-16) ! Character sets other than Unicode that are used in a Windows environment and are set to Russian in the multi-language setting
Pioneer accepts no responsibility for data lost on the USB memory/USB portable audio player even if that data is lost while using this unit.

iPod compatibility

This unit supports only the following iPod models. Supported iPod software versions are shown below. Older versions may not be supported. ! iPod nano 4th generation (software version 1.0.3) ! iPod nano 3rd generation (software version 1.1.3) ! iPod nano 2nd generation (software version 1.1.3) ! iPod nano 1st generation (software version 1.3.1) ! iPod touch 2nd generation (software version 3.0) ! iPod touch 1st generation (software version 3.0) ! iPod classic 120GB (software version 2.0.1) ! iPod classic (software version 1.1.2) ! iPod 5th generation (software version 1.3) ! iPhone 3GS (software version 3.0) ! iPhone 3G (software version 3.0) Depending on the generation or version of the iPod, some functions can not be operated.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPhone
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
iPhone is a trademark of Apple Inc. Works with iPhone means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Specifications

Rated power source.. 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Grounding system. Negative type Maximum current consumption... 10.0 A Dimensions (W H D): DIN Chassis. 178 mm 50 mm 165 mm Nose.. 188 mm 58 mm 23 mm D Chassis. 178 mm 50 mm 165 mm Nose.. 170 mm 48 mm 23 mm Weight.. 1.4 kg
WMA decoding format. Ver. 7, 7.1, 8, 9, 10, 11 (2ch audio) (Windows Media Player) AAC decoding format. MPEG-4 AAC (iTunes encoded only) (.m4a) (Ver. 8.2 and earlier) WAV signal format. Linear PCM & MS ADPCM (Non-compressed)
USB standard specification... USB 2.0 full speed Maximum current supply. 500 mA USB Class.. MSC (Mass Storage Class) File system.. FAT12, FAT16, FAT32 MP3 decoding format. MPEG-1 & 2 Audio Layer 3 WMA decoding format. Ver. 7, 7.1, 8, 9, 10, 11 (2ch audio) (Windows Media Player) AAC decoding format. MPEG-4 AAC (iTunes encoded only) (.m4a) (Ver. 8.2 and earlier) WAV signal format. Linear PCM & MS ADPCM (Non-compressed)
Maximum power output. 50 W W 2/4 W + 70 W 1/2 W (for subwoofer) Continuous power output. 22 W 4 (50 Hz to Hz, 5 % THD, 4 W load, both channels driven) Load impedance.. 4 W to 8 W W to 8 W 2 + 2 W 1 Preout maximum output level... 2.2 V Equalizer (5-Band Graphic Equalizer): Frequency. 100/315/1.25k/3.15k/8k Hz Gain.. 12 dB HPF: Frequency. 50/63/80/100/125 Hz Slope. 12 dB/oct Subwoofer (mono): Frequency. 50/63/80/100/125 Hz Slope. 18 dB/oct Gain.. +6 dB to 24 dB Phase.. Normal/Reverse Bass boost: Gain.. +12 dB to 0 dB

Published by Pioneer Corporation. Copyright 2009 by Pioneer Corporation. All rights reserved.

Printed in China

<KSNZX> <09L00000>

<YRD5316-A/S> ES

 

Tags

G1N EXT A7V600 SE LN26C450 465618X51 Gpsmap 200 GP-2000 DT-560 Citroen AX Receiver MCV903 EX-627 GS605V2 TH-A85 PT-AE2000E UP-820F Continentaal Acoustics GT50 SRT 5011 PSR-I425 Moto Z9 AVH-P3100DVD HDR-SR11E SGH-M600 KDC-W4644UY RX-V520 P4S800D UX-J50 GMX 200 TA522 RBC30SBT CDE-7854RM RC-591 PS-50Q96HD UE32B6000VP MG100 DFX Chicco GO AQ12ugax NEO 3 Clicksmart 310 PSC 1200 UE46C5100QW HM400JI 32PC5RVH Astra 4700 VDR-D150EE ME-30 WEP210 Minitel 2 Bassman 150 DV390 MCD149 Ericsson C510 Landiao NV3 XE3-GD XJ600S-2000 DSP-AX540 440 Madden 2005 Coupe CXS-GT2313 Philips 107T Sketch PAD Station AVH-5200BT DR-MV1sus-dr-mv1 Domain Olympus E-5 LE-32R86BD RS-B765 90 Plus LV4747 SCX-4828FN XIP Htr5000 Bolens G174 Alertegps G50 Thinkpad X60S PMD 8 Motorazr V3X Alcatel-lucent 2410 Aspire-T310 933HD Plus KL-750E LBT-D570 Digimax 430 M1201 2700g N Player VPL-PX35 Deluxe Adaptor S1030 Doro BM50 KV-21FX20B Asus M6N Darkblue 4 400PX Centauri RS-TR373 CDX-5100 Combo Amps DVR-710

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101