Do not expose the camcorder to soot or steam: - hick soot or steam could damage the camcorder case or cause a malfunction. T Do not use the camcorder near corrosive gas: - the camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel engines, If or corrosive gas such as hydrogen sulphide, the external or internal terminals could corrode, disabling normal operation, or the battery connection terminals could corrode, so that power will not turn on. Do not use the camcorder near an ultrasonic humidifier: - alcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere to the C optical head of the camcorder, which could cause it to operate abnormally. Do not clean the camcorder body with benzene or thinner: - he coating of exterior could peel off or the case surface could deteriorate. T - hen using a chemical cleaning cloth, follow the instructions. W Keep a memory card out of reach of children to prevent swallowing. T o disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

ABOUT THIS USER MANUAL

T hank you for purchasing this Samsung Camcorder. Please read this user manual carefully before you use the camcorder and keep it handy for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting. T he 'SMX-K44'and 'SMX-K45' have a 16GB and 32GB built-in memory respectively but also use memory cards. The 'SMX-K40' does not have built-in memory and uses memory cards exclusively. Although some features of 'SMX-K40', 'SMX-K44' and 'SMX-K45' are different, they operate in the same way. Illustrations of model SMX-K40 are used in this user manual. The displays in this user manual may not be exactly the same as those you see on the LCD screen. Designs and specifications of storage media and other accessories are subject to change without any notice. In this user manuals function descriptions, the icon on the on-screen display section means that it will appear on the screen when you set the corresponding function. Ex) Submenu item of Video Resolution page 55 - item contents on-screen display
"TV Super Fine" Videos recorded in 720x576(50i) resolution at super-fine image quality.
(If set, corresponding icon ( ) will appear on the screen.) Descriptions of the built-in memory in this user manual apply only to the following models: SMX-K44(16GB), SMX-K45(32GB) English_vii

Excessive rotation may damage the connective hinge between the screen and the camcorder. When the LCD screen is rotated by 180, the left and right sides of the subject are shown in reverse, which produces horizontally flipped image. Remove fingerprints or dust on the screen with a soft cloth.

English_15

CONNECTING A POWER SOURCE
Be sure to charge the battery pack before you start using your camcorder. Use the IA-BH130LB battery pack only. The battery pack may be charged a little at the time of purchase.
Battery pack insertion/ejection
It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder.
Inserting the battery pack
1. Slide and open the battery slot cover as shown in the diagram. 2. Insert the battery pack into the battery slot until it locks. Make sure that the SAMSUNG logo is facing up while the battery pack is placed as shown in the diagram. 3. Slide and close the battery slot cover. Insert
Ejecting the battery pack
1. Pull the ejected battery out in the direction as shown in the diagram. 2. Slide and close the battery slot cover. Eject
Remove the battery pack separately from the camcorder while not in use. It is recommended to prepare an additional battery pack for prolonged outdoor use. Additional battery packs can be purchased from samsungparts.com.

16_English

Charging the battery
You can charge the battery using the AC power adaptor or USB cable. 1. Press the Power ( ) button to turn off the camcorder. page 23 2. Insert the battery in the camcorder. page 16 3. Open the connector cover of the unit. 4. Charge the battery using the AC power adaptor or USB cable. The CHG (charge) lamp lights up and charging starts. When the battery is fully charged, the charging (CHG) lamp turns green. page 18
Using the AC power adaptor Using the USB cable Connect the AC power adaptor to the camcorder properly and plug the AC power adaptor in the wall outlet. Connect the USB cable to the camcorder properly and connect the other end to a USB port of a PC.
Connecting the AC power adaptor
Charging the battery pack at low temperature may take longer or fail to fully charge (green indicator will not turn on). Please make sure that there are no foreign substances in the plug and socket when you connect the AC power supply to the camcorder. Fully charge the battery pack before use. When using the AC power supply, place it close to the wall outlet. If you experience a malfunction while using the camcorder, separate the AC power supply immediately from the wall outlet. Do not use the AC power supply in a tight space, such as between furnishings.

Connecting the USB cable

When recording indoors with an available wall outlet, it is convenient to use the AC power supply instead of the battery pack. It is recommended to charge the battery pack in a place with ambient temperature of 50F~86F (10C ~ 30C). When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will override the USB. If the camcorder is turned on, the battery will still charge, but more charging time will be needed. It is recommended you to keep the camcorder turned off while charging.

English_17

Charging indicator
Tips for battery identication The colour of the LED indicates the charging status. If the battery has been fully charged, the charge indicator is green. While the battery is being charged, the charge indicator lights orange. If an error occurs while the battery is being charged, the charge indicator blinks orange. Charging (CHG) lamp The colour of the charging indicator shows the charging state.
Charging state LED Colour Charging (Orange) Charge Fully Charged (Green)
<Charging indicator>

Error (Orange Blink)

Battery Level Display
The Battery Level Display shows the amount of battery power remaining in the battery pack.
Battery Level Indicator State Message
STBY 0:00:00 [475Min] 9999
Fully charged 20%~40% used 40%~60% used 60%~80% used 80%~99% used Exhausted (flickers): The device will soon turn off. Change the battery pack as soon as possible. (flickers): The device will be forced to turn off after 3 seconds. Before using the camcorder, charge the battery. Above figures are based on a fully charged battery pack at normal temperature. Low ambient temperature may affect the use time.

"Low battery"

18_English
Charging, recording and playback times with fully charged battery pack (with no zoom operation, etc.)
For your reference, the approximate time with fully charged battery pack: Battery type Charging time Using a AC power adaptor Using a USB cable 720 x 576 (50i) Video resolution
Continuous recording time Playback time
IA-BH130LB approx. 2 hr. approx. 4 hr. 640 x 480 (25p) TV Normal ( ) approx. 120min. approx. 130min. Web Fine ( ) Web Normal ( )

TV Super Fine ( )

TV Fine (
- he time is only for reference. Figures shown above are measured under Samsung's test environment, and may T differ according to user and condition. - We recommend using the AC power adaptor when using the Time Lapse REC function.

20_English

Maintaining the battery pack
W e recommend only using the original battery pack that is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste. Clean the terminals to remove any foreign substances before inserting the battery. Do not put the battery pack near any heat source (i.e. fire or heater). Do not disassemble, apply pressure to, or heat the battery pack. D o not allow the '+' and '-' terminals of the battery pack to be short-circuited. It may cause leakage, heat generation, induce overheating or fire. Do not expose the battery pack to water. The battery pack is not water resistant. W hen fully discharged, a battery pack damages the internal cells. The battery pack may be prone to leakage when fully discharged. R emove the battery pack from the charger or camcorder when not in use. Even when the power is switched off, the battery pack will still discharge if it is left attached to the camcorder. W hen not using the camcorder for an extended period: It is recommended that you charge the battery pack once every 6 months, attach it to the camcorder and use it up: then remove the battery pack and store it in a cool place.

About the battery life

B attery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace it with a new one. Each battery's life is governed by storage, operating and environmental conditions.
Use only Samsung-approved battery packs. Do not use batteries from other manufacturers because there is a danger of overheating, fire or explosion. Samsung is not responsible for problems occurring due to using unapproved batteries.

English_21

Using a household power source
Make the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case.
Using the camcorder with the AC power adaptor
It is recommended that you use the AC power adaptor to power the camcorder from a household AC outlet when you perform settings on it, play back, or use it indoors. - ake the same connections as you do when charging the battery pack. page 17 M

Multi View Option provides sorting thumbnails of recorded videos and photos by order of recording, recorded date, and the iSCENE mode which can be used for playback at your preferred order. page 70

46_English

PLAYING VIDEOS
This function works only in Video Play ( ) mode. You can find a desired video image quickly using the thumbnail index view.
1. Open the LCD screen and then the camcorder is powered on automatically. page 23 Set the appropriate storage media. (SMX-K44/K45 only) page 36 (If you want to playback images on a memory card, insert a memory card.) 2. Press the MODE button to select the Play mode. The thumbnail index view appears. The thumbnail highlight is on the latest created or played file. Playing time of the selected file and the thumbnail showing the video playback will appear on the screen. 3. Select the Video thumbnail index view screen. You can simply switch between video and photo thumbnail view using the zoom lever. 4. Use the Control button ( / / / ) to select the desired videos, and then press the OK button. If you set the Date/Time Display before video playback, date/time appears briefly for about a second and then the selected video starts playing. Shortcut menu for playback will be displayed for a while. The selected videos are played according to the Play Option setting. page 71 To stop playback and return to the thumbnail index view, move the zoom lever.

04/JAN/2009

English_47
If there is no file stored to view, the message "Empty" appears. Video files may not playback on the camcorder in the following cases: - Video files edited or renamed on a PC - Video files recorded by devices other than the camcorder - Video file formats that are supported The built-in speaker automatically turns off when the Audio/Video cable is connected to the camcorder. (When connected to external devices, volume adjustment should be done on the connected external device.) You can playback recorded video files on a TV or a PC. pages 95,100 You can upload recorded videos or photos to YouTube or Flickr using Intelli-studio. page 105 For various functions available during playback, see "playback options." pages 69~81 Use the Quick View function if you want to preview the last recorded video or photos. page 42

Adjusting the volume

Press the Control button ( / ) to increase or decrease the volume. The volume bar disappears after 3~4 seconds. You can hear the recorded sound from the built-in speaker. The level can be set to anywhere between 0 and 10. (If you close the LCD screen while playing, you will not hear the sound from the speaker.)

48_English

English_57

Shutter Speed
The memory camcorder automatically sets the shutter speed depending on the subject brightness. You can also manually adjust the shutter speed according to the scene conditions.
item "Auto" contents The memory camcorder automatically sets the appropriate aperture value. on-screen display None "Manual" Shutter speed can be set to 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, or 1/10000.
Setting the shutter speed manually: STBY 0:00:00 [475Min] 9999 You can set the shutter speed manually. A fast shutter speed can freeze the motion of a fast moving subject and a slow shutter speed can blur the subject to give the impression of motion. The adjusted value is applied right after moving the Control Manual Shutter button ( / ) to adjust the shutter speed. 1/500 Press the Control button ( / ) to select the desired indicator to adjust shutter Exit Adjust OK speed, then press the OK button. - The adjusted value is applied right after pressing the Control button ( / ) to adjust the shutter speed. Recommended shutter speed when recording:
shutter speed 1/50 1/120 1/250, 1/500, 1/1000 1/2000, 1/4000, 1/10000 conditions The shutter speed is fixed at 1/50 second. Black bands that usually appear when shooting a TV screen become narrower. The shutter speed is fixed at 1/120 second. Indoor sports such as basketball. The flickering that occurs when shooting under a florescent light or mercury-vapour lamp is reduced. Moving cars, trains or other rapidly moving vehicles such as roller coasters. Outdoor sports such as golf and tennis.
Do not shoot the sun while the shutter speed is set to 1/1000 or slower. Slow shutter speed exposes the sensor to more lights, which may deteriorate the product.
The image may not seem smooth when a high shutter speed is selected. When recording with a shutter speed of 1/1000 or higher, make sure the sun is not directly shining into the lens.
Shutter speed 1/100 seconds means the shutter box is opened for 1/100 seconds. Faster shutter speed is recommended for shooting a dynamic subject. Note that higher shutter speed produces darker image. As the shutter speed increases, the sensor accepts less light than a slower shutter speed setup.

58_English

Fade In (Approx. 3 seconds)
Fade Out (Approx. 3 seconds)
This function is disabled after being used one time.

Wind Cut

You can reduce wind noise when recording sound from the built-in microphone. If "Wind Cut : On" is set, the low-frequency components in the sound picked up by the microphone will be cut off during recording: This makes it easier to hear voice and sound during playback. Use the Wind Cut feature when recording in windy places such as a beach. item "Off" "On" Disables the function Minimises wind noise or other noise while recording. contents on-screen display None
When "Wind Cut" is "On", some low frequency sound is eliminated along with the sound of the wind.

64_English

Zoom Type
The memory camcorder offers three types of zoom: optical, intelligent and digital zoom when recording videos.
This right side of the bar shows the digital zooming zone. The zooming zone appears when you move the zoom lever.
on-screen display None None
"Optical Zoom" nly optical zoom is available up to 52x. O "Intelli-Zoom" - he camcorder zooms the full width of the image sensor to obtain a larger zoom range T without any deterioration in image quality. - Intelli-zoom is available up to 65x.
- hen this option is selected, the camcorder will switch automatically to the digital zoom W when you zoom in beyond the optical or intelligent zoom range. With the digital zoom the "Digital Zoom" image is processed digitally so image quality will deteriorate the more you zoom in. - Digital zoom is available up to 2200x.
The image quality may deteriorate depending on how much you zoom in on the subject. Maximum zooming may result in lower image quality. The Optical Zoom and the Intelli-Zoom preserve the video quality, but during digital zoom the image quality may suffer. The zoom range will change depending on the aspect ratio of the video.

English_65

Time Lapse REC
Time Lapse REC records still images at specific intervals you can set, and plays them as one video file. This function is useful for observing the movement of clouds, the changes in daylight or blooming flowers, etc. item "Off" "On" Disables the function. When you start video recording, images of the subject are captured and saved to the storage media by set interval and total recording period.
SettingtheTimeLapseRECmode:
To record in the Time Lapse REC mode, you need to set the recording interval and total recording time in the menu.

Off On

: 1Sec
24Hr 1. Press the MENU button. Exit 2. Press the Control button ( / ) to select "TimeLapseREC." 3. ress the Control button ( / ) to select "On", then press the OKbutton. P STBY 0:00:00 [475Min] The recording interval and total time for recording items are displayed. Time Lapse REC ("Sec":seconds, "Hr": hours) 30 Sec 24 Hr Off 4. et a desired recording interval ("Sec") with the Controlbutton ( / ). S On = 1Min 55Sec 5. Move to the next setting with the Control button ( / ) and set a desired total Exit Move Set recording time ("Hr") in the same way. While you set the preparatory settings (recording interval and total recording time), 0:00:00 [475Min] the approximate time-lapse recording time will be displayed on the menu screen. 9999 30Sec / 24Hr Time Lapse Recording 6. ress the OK button to finish the setting and press the MENU button to exit the menu. P 7. fter setting the Time Lapse REC mode, press the Recordingstart/stop button. A The Time Lapse REC starts. While playing back, it will display 25 images per second. (Sound is not available.) For example, if the recording interval was "30" seconds and the total recording time was "24"hours, images are automatically captured and saved in the storage media every 30 second for 24 hours. (After 24 hours of recording, playback will last for about "1Min55Sec") 66_English

Normal View 0:59:59 1/10

Select File
Exit Story-Board Print 0:59:59 1/10

Select

76_English
Storyboard images are displayed in 4:3 aspect ratio. Hence, it may not display the entire image on the LCD screen. On a computer, it will display the entire image. Usingthe VIEWbutton,youcanpreviewstoryboardimagestobe printed. page75 The storyboard printing may not show all 16 i-Frame thumbnails in following case: - Recorded video is too short (To extract 16 i-Frame thumbnails from a video, its recorded time should be longer than 8 seconds.)

EDIT (DIVIDE)

You can divide a video clip as many times as you want in order to delete a section you no longer need. The videos will be divided in groups of two. 1. Open the LCD screen and then the camcorder is powered on automatically. page 23 Set the appropriate storage media. (SMX-K44/K45 only) page 36 (If you want to playback images on a memory card, insert a memory card.) 2. Press the MODEbutton to select the Play mode. 3. Select the Video thumbnail index view screen. You can simply switch between video and photo thumbnail view using the zoom lever. 4. Press the MENU button Control button ( / /OK) to select "Edit" "Divide." 5. Select a desired video clip using the Control button ( / / / /OK). The selected video clip will be paused. 6. Search the point of division by pressing theControlbutton ( / /OK). 7. Press the MENU button to pause at the point of division. A message appears asking for your confirmation. 8. Select "Yes." If you want to delete an unwanted section of a video clip, divide the video first, and then delete the image (section) you no longer need. After dividing the video clip, you can also combine other desired videos. page 79 The second image of the divided image will be displayed at the end of the thumbnail index.
Exit Move 0:00:27/0:00:55 100-0001 Divide Select Normal View

Divide Combine

Exit Divide 0:00:55 1/10

Divide

English_77
Example: You can divide a video clip into two in order to delete a section you no longer need. 1. Before dividing 2. After image is divided at 30 second point. 3. After deleting first image.

contents In the standby mode, closing the LCD screen turns off the camcorder. In the standby mode, closing the LCD screen will soon execute the Quick On STBY mode, and then the camcorder turns off after 5 minutes. In the standby mode, closing the LCD screen will soon execute the Quick On STBY mode, and then the camcorder turns off after 10 minutes. In the standby mode, closing the LCD screen will soon execute the Quick On STBY mode, and then the camcorder turns off after 20 minutes.
on-screen display None None None None
Turning off the camcorder after use is always recommended to reduce the energy consumption, however, you can effectively use the Quick On STBY function for the frequent shooting conditions in the specified time schedule. In the Quick On STBY mode, Auto Power Off: 5 Min setting is disabled. The mode indicator keeps blinking in the Quick On STBY mode. The Quick On STBY mode is not available in the following conditions: - When the LCD screen is open. - When a video cable (HDMI, AV) or the USB cable is connected to the camcorder. - When operating the buttons on the camcorder.

92_English

PC Software
If you set PC Software to on, you can simply use the PC software by connecting the USB cable between the camcorder and your PC. You can download the stored videos and photos stored on the camcorder to your PCs hard disk. Editing video/photo files is also available using the PC software.
settings "Off" "On" Disables the function You can simply use the PC software by connecting the USB cable between the camcorder and your PC. contents on-screen display None None
The PC Software is compatible with the Windows OS only. page 100

TV Display

You can select the output path of the OSD (On Screen Display).
settings "Off" "On" The OSD appears in the LCD screen only. The OSD appears in the LCD screen and TV. (Connecting to a TV page 98) contents on-screen display None None

Default Set

You can initialise your camcorder settings to the factory defaults (initial settings at the factory). Initialising the camcorder settings to factory defaults does not affect recorded images.
After resetting the camcorder, set "TimeZone"and"Date/TimeSet." page 34

Version

The version information may be changed without notice for improvement.
Version Samsung Electronics Co., LTD. S/W 1.00, Jul 7 2009, 22:10:46 MICOM 1.00, JUL 7 2009

Language

You can select a desired language to display the menu and messages. page 35

English_93

Demonstration automatically shows you the major features that are included with your camcorder so that you may use them more easily. settings "Off" "On" Disables the function ctivates demonstration mode and shows various features on the LCD screen. A contents on-screen display None None

System requirements mentioned above are recommendations. Even on a system that meets the requirements, operations may not be ensured depending on the system. On a slower computer than recommended, video playback may skip frames or operate unexpectedly. When the version of DirectX on your computer is lower than 9.0, install the programme in version 9.0 or higher.

English_101

USING THE INTELLI-STUDIO PROGRAMME
Using the built-in Intelli-studio programme in your camcorder, you can transfer video/photo files onto your PC and edit them on your computer. The Intelli-studio offers the most convenient way for you to manage video/photo files by using the simple USB cable connection between the camcorder and your PC.
Starting the Intelli-studio programme
Step1.ConnectingtheUSBcable 1. Set the menusettingto PCSoftware:On.page 93 You will find the default menu settings are set as shown at right. 2. Connect the camcorder and the PC with the USB cable. A new file saving screen appears with the Intelli-studio main window. According to your computer type, the corresponding removable disk window appears. 3. Click Yes, the uploading procedure will start. Click Yes to confirm. If you do not want to save a new file, selectNo.
PC Software TV Display Default Set Exit Move Select Off On

DisconnectingtheUSBcable

After completing the data transfer, make sure to disconnect the cable in the following way: 1. Click on the Safely Remove Hardware iconicon on the taskbar. 2. Select USB Mass Storage Device, and then click Stop. 3. If the Stop a Hardware device window appears, click OK. 4. Disconnect the USB cable from the camcorder and PC.

102_English

Use the provided USB cable. (Supplied by Samsung) Dont apply excessive force when inserting or extracting the USB cable into/from a USB jack. Insert the USB after checking the correct direction of its insertion. We recommend using the AC power adaptor as power supply instead of the battery pack. When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction. If you disconnect the USB cable from the PC or the camcorder while transferring data, the data transfer will stop and the data may be damaged. If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the camcorder. According to your computer type, the Intelli-studio programme may not run automatically. In this case, open the desired CD-ROM drive that has the Intelli-studio programme in My Computer and run iStudio.exe. When a USB cable is connected, if you have EmoDio (Samsung's MP3 player software) installed on your computer, the EmoDio software may load first.
Step 2. About the Intelli-studio main window When the Intelli-studio starts up, thumbnails of videos and photos are displayed in the main window.

If the Removable Disk window does not appear, confirm the connection (page 100) or repeat steps 1 and 3 again. When the removable disk does not appear automatically, open the removable disk folder of My Computer. If the connected camcorders disk drive does not open or the context menu that appears when right-clicking your mouse (open or browse) appears broken, your computer may be infected by an Autorun virus. Be sure to update your antivirus software to the latest version.

Photos

Videos

108_English

Structureoffoldersandfilesonthestoragemedia
The folder and file structure for built-in memory or memory card is as follows. Dont arbitrarily change or remove the folder or file name. It may not be playable.
The SD-quality videos are named as SDV_####.MP4 and Web videos are named as WEB_####.MP4. The SD quality videos will be named as SDE_####.MP4 when you edit videos using the PC software. The file number automatically increases when a new video clip file is created. Up to 9,999 files can be created in one folder. A new folder is created when more than 9,999 files are created. As with video clip files, the file number automatically increases when a new image file is created. The maximum file number allowed is the same as in video clip files. A new folder stores files starting with SAM_0001.JPG. The folder name increases in the order of 100PHOTO 101PHOTO etc. Up to 9,999 files can be created in one folder. A new folder is created when more than 9,999 files are created.

Videos (H.264)

VIDEO 100VIDEO SDV_0001.MP4 WEB_0002.MP4 SDV_0003.MP4 SDE_0004.MP4 WEB_0005.MP4

Photos

DCIM 100PHOTO SAM_0001.JPG SAM_0002.JPG

Imageformat

Videos are compressed in H.264 format. The file extension is ".MP4." Refer to page 55 for video resolution.
Photos Photos are compressed in JPEG (Joint Photographic Experts Group) format. The file extension is ".JPG." Refer to page 55 for photo resolution.
When the 9,999th file is created in the 999th folder (i.e. SDV_9,999.MP4 is created in the 999 VIDEO folder), no more folders can be created. Backup your files to a PC and format the storage media, and then reset the file numbering from the menu. We don't recommend you modify the name of a file/folder stored in the storage media using a PC. If you modify it, this camcorder may not recognise the modified files. You can use your camcorder as a storage device.

Power Sources (United Kingdom Only)
The mains lead on the power adapter is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows: The wire coloured BLUE must be connected to the terminal marqueed with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marqueed with the letter L or coloured BROWN or RED. Do not connect either wire to the earth terminal marqueed with the letter E or the earth symbol, coloured GREEN or GREEN and YELLOW. , or
This page is applicable to Great Britain only

English_127

contact SAMSUNG world wide
Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K EIRE AUSTRIA SWITZERLAND Latvijas Republika Lietuvas Respublika Essti Vaabarik RUSSIA KAZAKHSTAN UZBEKISTAN KYRGYZSTAN TADJIKISTAN UKRAINE AUSTRALIA NEW ZEALAND CHINA HONG KONG INDIA INDONESIA MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM TURKEY SOUTH AFRICA U.A.E 1-800-SAMSUNG(726-7864) 01-800-SAMSUNG(726-7864) 1-800-SAMSUNG(726-7864) 0800-333-3733 0800-124-421, 4004-0000 800-SAMSUNG(726-7864) 00-1800-5077267 800-7919267 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800-SAMSUNG(726-7864) 0-800-100-5303 01-800-SAMSUNG(800-726786) 8-SAMSUNG(7267864) 30-- SAMSUNG(726-7864 0,14/Min) 06-80-SAMSUNG(726-7864) 800-SAMSUNG(726-7864) 0900-SAMSUNG (0900-7267864) ( 0,10/Min) 3-SAMSUNG(7267864) 1SAMSUNG(172678), 022-607-93-33 80820-SAMSUNG(726-7864) 0800-SAMSUNG(726-7864) 902-1-SAMSUNG (678) 075-SAMSUNG(64) 0845 SAMSUNG (7267864) 100 0810-SAMSUNG(7267864, 0.07/min) 0848-SAMSUNG(7267864, CHF 0.08/min) Bezmaksas informatvasi tlrunis 80007267 Informacines linijos telefonas 880077777 +8-800-555-55-55 8-10-800-500-55-500 8-10-800-500-55-500 00-800-500-55-500 8-10-800-500-55-500 8-800-502-0800 SAMSUNG (786) 800-810-5858, 400-810-5858, 010-3698-8282, 1800 110011, 1-800-3000-8282 0800-112-8888 1800-88-9999 1-800-10-SAMSUNG(726-7864) 1-800-3-SAMSUNG(726-7864), 02-5805777 1800-SAMSUNG(726-7864) 1800-29-3232, 02-689-3232 0800-329-0860-SAMSUNG(726-7864 ) 800-SAMSUNG (726-7864), 8000-4726 Contact Centre

If you have any questions or comments relating to Samsung products, please contact the samsung customer care centre.
Web Site www.samsung.com/ca www.samsung.com/mx www.samsung.com/us www.samsung.com/ar www.samsung.com/br www.samsung.com/cl www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com.co www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.com/lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.com/ie www.samsung.com/at www.samsung.com/ch www.samsung.lv www.samsung.lt www.samsung.ee www.samsung.ru www.samsung.com/kz_ru www.samsung.com/kz_ru www.samsung.ua www.samsung.com/au www.samsung.com/nz www.samsung.com/cn www.samsung.com/hk www.samsung.com/in www.samsung.com/id www.samsung.com/my www.samsung.com/ph www.samsung.com/sg www.samsung.com/th www.samsung.com/tw www.samsung.com/vn www.samsung.com/tr www.samsung.com/za www.samsung.com/ae

Europe

Asia Pacific

Middle East & Africa

RoHS compliant
Our product complies with The Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment, and we do not use the 6 hazardous materialsCadmium(Cd), Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr +6), Poly Brominated Biphenyls (PBBs), Poly Brominated Diphenyl Ethers(PBDEs)- in our products.